More material pairs
Material pair
How to Glue Ceramic to Glass
Use 2-part epoxy for most ceramic-to-glass display joints — it cures clear and rigid. Switch to silicone if the joint will stay wet or needs to flex.
Best Adhesive for Ceramic to Glass
Cures clear, rigid, and waterproof — right for joins that never flex.
Reviewed and adjusted by an editor.
Why 2-part epoxy Works
- A clean break fits back like a puzzle with almost no gap — ideal for thin glue lines. Unglazed faces are porous; glazed faces are not.
- Non-porous and unforgiving — any grease film or fingerprint weakens the joint and stays visible through the glass forever.
- Fills the tiny gaps in a clean break and survives hot water.
- Cures clear and rigid, and stays waterproof.
Alternatives
Other Adhesives That Work
It seals rather than joins: right where a ceramic fixture meets a wet surface, wrong for a break that has to hold together.
Better when: Water immersion, Flexing or movement
Products
Products for Bonding Ceramic to Glass
- Devcon 5 Minute EpoxyRapid, crystal-clear bonding on metal, glass, ceramic, wood, and rigid plastics — the benchmark fast-curing 2-part epoxy for jewelry, fine craft, and clean household break repairs.
- Gorilla 2-Part EpoxyGeneral household rigid repairs where a clear, gap-tolerant bond matters.
- J-B Weld OriginalRigid metal repairs — a cracked bracket, a stripped hole, a broken tool handle.
- J-B Weld SteelStik Epoxy PuttyHand-kneadable, non-rusting steel-reinforced epoxy putty for emergency plumbing repairs, auto components, stripped metal threads, and rebuilding missing metal/machinery sections — sets in 5 minutes and fully cures in 1 hour with 4,000 psi tensile strength.
Questions
Common Questions About Gluing Ceramic to Glass
- Can you glue ceramic to glass?
- Yes, on a clean, dry joint that will not flex. 2-part epoxy cures clear and rigid; if the piece will stay wet or needs to move, use silicone instead.
- Should I use silicone instead of epoxy on ceramic and glass?
- Use silicone when the joint will be submerged, washed often, or asked to flex. Epoxy is the clearer line for a stable display piece that never moves.
- Will fingerprints ruin a glass glue joint?
- They can. Skin oil is a weak film under the adhesive and may stay visible through the glass. Clean the glass just before bonding and handle it by unbonded edges.
- Can glue alone hold a glass piece that could fall?
- Add a mechanical support when detachment could drop glass or injure someone. Adhesive can join and seal; a safety-critical piece should stay retained if the bond fails.