Should I use clear epoxy or color-match it to the granite?

For small chips on speckled granite, clear epoxy acts as a optical window that reveals the natural stone color below. For large chips on solid black or white quartz, blending in a drop of dedicated stone epoxy pigment gives a better visual match.

Will a razor blade scratch my polished granite countertop?

Hardened granite (Mohs hardness 6 to 7) is harder than a standard steel razor blade (hardness 5.5). As long as you hold the blade at a low angle and keep it flat without digging the corners into the stone, it will shave the epoxy flush without scratching the stone.

Is cured epoxy food-safe on a kitchen countertop?

Fully cured 2-part epoxy is chemically inert and safe for incidental food contact. However, avoid chopping directly on the repaired spot with knives or placing 400°F pots directly on top of the cured resin.

What if I still have the chipped-off piece of granite?

If the broken stone fragment is intact, glue it directly back into place with thin clear epoxy or cyanoacrylate gel, hold it flush for 2 minutes, and wipe off squeeze-out with acetone.

All articles

Guide

Repair a chipped granite or stone countertop

Use clear 2-part epoxy or stone-repair acrylic to fill countertop edge chips. It cures glass-hard, polishable, and impervious to kitchen cleaners.

Natural stone

This task involves: Visible glue line, Gap or poor fit

Best Glue for This Repair

Clear 2-part stone epoxy

Cures rock-hard without shrinkage, bonds into micro-pores of stone, and can be shaved flush with a razor.

Reviewed and adjusted by an editor.

Why Clear 2-part stone epoxy Works Here

Dense, heavy, and brittle in tension. While cement mortar is used to bed large paving slabs, household repairs and countertop seam fabrication rely on 2-part epoxy. Crucially, natural stone is sensitive to chemical staining: standard acetic-cure silicone releases acid that bleeds dark oily halos into porous marble and limestone, requiring dedicated 100 % neutral-cure or non-staining silicone.
High-strength 2-part epoxy bonds broken stone slabs, anchors undermount sink brackets, and cures rigid with zero oil migration.

How to do it

Repair a chipped granite or stone countertop: Step by Step

Clean the chipped stone cavity thoroughly using pure acetone on a cotton swab to remove all oils and food grease, then let it dry completely.
Apply blue painter's tape around the edges of the chip to protect the surrounding polished granite surface.
Mix equal parts of 2-part clear epoxy, optionally blending in a tiny pinch of matching stone dust or pigment for patterned granite.
Fill the chip until the epoxy domes slightly higher than the countertop surface, then cover it with a small square of clear plastic wrap to smooth.
Once fully cured, hold a fresh single-edge razor blade at a 45-degree angle flat against the stone and carefully shave the epoxy bead dead flush.

Conditions

When to Use Thick cyanoacrylate (CA) gel with activator Instead

For tiny pinholes or shallow surface flea bites under 2 mm, high-viscosity super glue gel paired with an aerosol activator provides a fast cosmetic fill.

Alternatives

Other Adhesives That Work

Thick cyanoacrylate (CA) gel with activator
Cures in seconds for tiny shallow pits, but has lower impact resistance on larger edge chips.

Questions

Common Questions About This Repair

Should I use clear epoxy or color-match it to the granite?: For small chips on speckled granite, clear epoxy acts as a optical window that reveals the natural stone color below. For large chips on solid black or white quartz, blending in a drop of dedicated stone epoxy pigment gives a better visual match.
Will a razor blade scratch my polished granite countertop?: Hardened granite (Mohs hardness 6 to 7) is harder than a standard steel razor blade (hardness 5.5). As long as you hold the blade at a low angle and keep it flat without digging the corners into the stone, it will shave the epoxy flush without scratching the stone.
Is cured epoxy food-safe on a kitchen countertop?: Fully cured 2-part epoxy is chemically inert and safe for incidental food contact. However, avoid chopping directly on the repaired spot with knives or placing 400°F pots directly on top of the cured resin.
What if I still have the chipped-off piece of granite?: If the broken stone fragment is intact, glue it directly back into place with thin clear epoxy or cyanoacrylate gel, hold it flush for 2 minutes, and wipe off squeeze-out with acetone.